Încercaţi să căutaţi în funcţie de cuvinte-cheie, codul produsului sau codul de comandă ori numărul de serie, de exemplu, „CM442” sau „Informaţii tehnice”
Introduceţi cel puţin 2 caractere pentru a începe căutarea.
  • Istoric
Flowfit CPA25 - Flow assembly  with splash protection cap

Flow assembly
Flowfit CPA25

Universal assembly for the water and wastewater industry and industrial auxiliary processes.

CPA25
Please Wait (spinning wheel)
Se încarcă preţul
Preţurile sunt temporar indisponibile
Price on request
Filtrare măsurători / aplicaţie
Activitate de măsurare / aplicaţie

Configurare pentru descărcarea desenelor CAD ale acestui produs

  • Measuring principle

    Potentiometric

  • Application

    Water, Wastewater, Utilities

  • Installation

    Flow assembly

  • Characteristic

    Piping, bypass, branch line

  • Design

    '- Three PG13.5 sensor ports (shaft length 120 mm)
    - calibration direct in the holder possible with a removable calibration cap

  • Material

    Holder: Polypropylene PP
    Sealing: EPDM or FKM available

  • Process temperature

    0 to 80°C
    (32 to 176°F)

  • Process pressure

    max. 6 bar at 20°C
    (87 psi at 68°F)

  • Measuring principle

    Amperometric oxygen measurement

  • Application

    Water, Wastewater, Utilities

  • Installation

    Flow assembly

  • Characteristic

    Piping, bypass, branch line

  • Design

    '- Three PG13.5 sensor ports (shaft length 120 mm)
    - calibration direct in the holder possible with a removable calibration cap

  • Material

    Holder: Polypropylene PP
    Sealing: EPDM or FKM available

  • Process temperature

    0 to 80°C
    (32 to 176°F)

  • Process pressure

    max. 6 bar at 20°C
    (87 psi at 68°F)

  • Measuring principle

    Conductive

  • Application

    Water, Wastewater, Utilities

  • Installation

    Flow assembly

  • Characteristic

    Piping, bypass, branch line

  • Design

    '- Three PG13.5 sensor ports (shaft length 120 mm)
    - calibration direct in the holder possible with a removable calibration cap

  • Material

    Holder: Polypropylene PP
    Sealing: EPDM or FKM available

  • Process temperature

    0 to 80°C
    (32 to 176°F)

  • Process pressure

    max. 6 bar at 20°C
    (87 psi at 68°F)

  • Measuring principle

    Amperometric oxygen measurement

  • Application

    Water, Wastewater, Utilities

  • Installation

    Flow assembly

  • Characteristic

    Piping, bypass, branch line

  • Design

    '- Three PG13.5 sensor ports (shaft length 120 mm)
    - calibration direct in the holder possible with a removable calibration cap

  • Material

    Holder: Polypropylene PP
    Sealing: EPDM or FKM available

  • Process temperature

    0 to 80°C
    (32 to 176°F)

  • Process pressure

    max. 6 bar at 20°C
    (87 psi at 68°F)