Specificaţii pe scurt
-
Measured variables
Scattered light intensity, dust concentration (after gravimetric comparison measurement)
-
Process temperature
40 °C ... +220 °C
-
Device version
Ex-3K
Ex-2K
Domeniu de aplicare
The DUSTHUNTER SP100 is a type-approved measuring device with probe for very low to medium dust concentrations. Installation from one side makes it ideal for thick-walled or double-walled ducts. The measurement is based on the forward scattering of light. An automated check of the zero and reference point as well as a contamination check are on board in the device.
Emissions monitoring at power plants and waste incineration plants
Monitoring of filter systems
Measurements in exhaust gas or exhaust ventilation ducts
Device properties:
Installation from one side
For very low to medium dust concentrations
Automated check of zero and reference point
Hastelloy measuring probe available for corrosive gases
For small to medium duct diameters
Device version for explosive zone 2/22 or 1/21
Avantaje
Particularly well-suited for thick and dual-wall channels
Tested for suitability according to EN 15267
Low-maintenance thanks to self-monitoring and contamination monitoring
Quick installation since no alignment is required
Colecție Xpert
-
Produse de specialitate
- Conceput pentru aplicatii solicitante
Excelenţă tehnică
Simplitate
Variabil
-
Produse de specialitate
- Conceput pentru aplicatii solicitante
Excelenţă tehnică
Simplitate
Variabil
| Colecții FLEX | Excelenţă tehnică | Simplitate |
|---|---|---|
Colecție Fundamental Îndepliniți-vă nevoile esențiale de măsurare |
Excelenţă tehnică
|
Simplitate
|
Selecţie Lean Gestionați-vă cu ușurință procesele de bază |
Excelenţă tehnică
|
Simplitate
|
Colecție Extended Optimizați-vă procesele cu tehnologii inovatoare |
Excelenţă tehnică
|
Simplitate
|
Colecție Xpert Stăpâniţi cele mai dificile aplicaţii |
Excelenţă tehnică
|
Simplitate
Variabil |
Loading alternative products
Poveşti de succes
V-ar putea interesa şi
-
-
Instrucţiuni de operare (BA)
DUSTHUNTER SP100
Dust Concentration Monitor
EN RO 01/01/2025Limbă:
Engleză
Versiune:
01/01/2025
Dimensiune fişier:
5.3 MB
Nume fişier:
8029854_YWL2_OI_DUSTHUNTER_SP100_en_V3-0_2016-08_EHS.pdf
-
-
-
Soluţii pentru industrie (SO)
Broad range of solutions for waste-to-energy plants
Endress+Hauser offers ideal automation and safety solutions for collection, sorting and recycling of waste.
Limbă:
Engleză
Versiune:
01/01/2025
Dimensiune fişier:
2.4 MB
Nume fişier:
8030416_SO_Waste_en_V1-0_2025.01_EHS.pdf
-
-
-
Broşură de competenţă (CP)
Emission Monitoring Solutions – broad instrument portfolio and longstanding experience
Best in class dust measurement technology with the scattered light and
transmittance dust measuring devices from Endress+HauserLimbă:
Engleză
Versiune:
01/01/2025
Dimensiune fişier:
3 MB
Nume fişier:
8030014_CP_Dust_Measuring_Devices_en_V3-0_2025.01.pdf
-
-
-
Broşură de competenţă (CP)
Emission Monitoring Solutions – broad instrument portfolio and longstanding experience
An overview brochure about emission monitoring, their measuring
principles and technologies, global requirements and services, a
selection guide and the measuring devices at a glanceLimbă:
Engleză
Versiune:
01/01/2025
Dimensiune fişier:
4.5 MB
Nume fişier:
8029975_CP_Emission_Monitoring_Solutions_en_V3-0_2025.01_EHS.pdf
-
-
-
Inovaţie (IN)
DUSTHUNTER SP100 – Proven probe design with forward scattered light measurement
The DUSTHUNTER SP100 is a typeapproved measuring device with probe for very low to medium dust concentrations.
Limbă:
Engleză
Versiune:
01/01/2025
Dimensiune fişier:
2.7 MB
Nume fişier:
8030066_IN_DUSTHUNTER SP100_en_V1-0_2025.01_EHS.pdf
-
-
-
Verificare DTM
DUSTHUNTER SP100 SDD file
SOPAS device description file for DUSTHUNTER SP100
Limbă:
Language neutral
Versiune:
05/12/2024
Dimensiune fişier:
391 KB
Nume fişier:
DUSTHUNTER SP100 SDD file
-